HDD Low Level Format Tool 4.40 With Crack Full Version

HDD Low Level Format Crack Tool is a free utility for formatting low-level hard drives. This little program will erase low-level formatting and re-certify a SATA, IDE, or SCSI hard drive. Works with external USB and FIREWIRE drive enclosures. Low-level formatting of flash cards is also supported. The low-level formatting tool will erase partitions, MBR, and all user data. Low-level formatting (that is, closest to the hardware) marks the surfaces of the discs with markers that indicate the start of a recording block (normally today called sector markers) and other information such as CRC block to be used further. late, in normal operations, by the disk controller to read or write data. This is intended to be the permanent base of the disc and is often completed at the factory.

HDD Low Level Format Serial Key is just one of three processes of formatting a disk for use by an operating system and its applications. The other two are partitioning and high-level formatting. When you encounter constant data corruption, virus intrusion inside the MBR or bad sectors. Low-level training is necessary to get your faulty unit working again as long as the problems encountered have nothing to do with its mechanical integrity. Low-level format will replace bad sectors with redundant sectors. However, the number of redundant sectors on a disk is limited; and a drive’s read and write head wears out quickly when reading / writing redundant sectors. Therefore, low-level formatting will degrade the performance of the hard drive and reduce the life of the drive. Also, it takes considerable time to format a low-level hard drive. HDD Low Level Format Serial Key software creates a physical format by assigning a location to the disk for data storage. Since the actual low-level formatting is done at the factory, the HDD’s low-level format tool only does zero fills. Resets the disk to factory settings by writing a zero byte to each location on the drive. This will erase partitions and partition table (MBR) and erase all data on your disk completely and irreversibly. So if there are crucial files on it, first move them to other reliable hard drives or make a backup of them.

Here, I would like to introduce you a professional and free HDD Low Level Format Activation Key utility – HDDGURU HDD Low Level Format License Key Tool for personal / home use. In its simple user interface, it shows the model, serial number, activation time, power-up time, hardware temperature, firmware revision, physical parameters, etc. Format hard drives (SATA, SSD, IDE, SCSI, etc.), SD cards, memory cards, Firewire drives, and CompactFlash media devices using low-level formatting procedures. As its name suggests, this program can help you perform low-level formats. Although it is designed for hard drives, it can also work on USB flash memory devices. Additionally, some users report that it was helpful to recover pen drives that appeared to be permanently damaged. While it is true that low-level formatting is a rare operation, it may be necessary to troubleshoot your drives such as those caused by traumatic events that make your disks unresponsive. Similarly, low-level formatting can be used to erase the data on a disk and eliminate all chances that it can be recovered, which is crucial in preserving your privacy. The application has a simple but unattractive interface. In just two steps, you can format a given disk. All you need to do is choose the disk and start low-level formatting. As an additional option, instead of doing a full format, you can ask the program to do a quick erase, which means that only existing partitions and the master boot record will be deleted, while no changes will be made to the disk surface. . In addition, you can also check the details as well as the S.M.A.R.T. data (if available) about your device. Unfortunately, once you have chosen a device from the initial screen, you cannot reselect another, so you must exit the program and restart it.


HDD Low Level Format Free Download Tool for free on your computer and you will be able to format any storage unit, be it a USB memory, a memory card or a hard disk. HDD Low Level Format Free Download Tool is a tool that will allow us to format a hard drive using Low-level Formatting (LLT). There are two ways to format a hard drive, Low Level Formatting and High Level Formatting (also known as File System Formatting). The system used depends largely on the circumstances, although the most used by users in general is the formatting of the file system, after which it is possible to write to the hard disk. The HDD low-level formatting tool performs low-level formatting, which means that it not only removes information, but physically resets the drive effectively leaving it with empty platters. This makes it very difficult to retrieve the data. This is a tool for use on older drives, so while it may not be useful for modern computer users, it could make old computers safe for reuse or sale. This software is compatible with all major interfaces like SATA USB and IDE as well as almost all manufacturers. The software also supports useful flash cards if you frequently transfer private data.

HDD Low Level Format Free Download supports most types of devices, such as HDD, SSD, USB, flash cards (CompactFlash, MemoryStick, SD and MMC cards), etc .; supports interfaces including S-ATA (SATA), IDE (E-IDE), SCSI, SAS, FIREWIRE; supports the most common hard drive brands such as Western Digital (WD), Seagate, Hitachi, Maxtor, Samsung, IBM, Toshiba, Fujitsu, Quantum, etc. and it is compatible with Windows XP, Vista, 7, 8, Server 2003, 2008 and 2008R2.


  • Supported interfaces: S-ATA (SATA), IDE (E-IDE), SCSI, SAS, USB, FIREWIRE.
  • Large units (LBA-48) are allowed.
  • Supported by all manufacturers
  • The program also supports low-level formatting of flash cards using a card reader.


I’m only getting around 1.0-1.5MB per second, and my media is supposed to be much faster?

This is because you are using a very slow interface (1-1.5 MB per second is actually the limit of USB 1.0, so you should investigate problems with the USB ports). Another reason for the slow speeds could be that the storage device has some damage.

The tool was formatting at about 10MB per second. However, after purchasing a license, the speed remains the same – 10MB per second. Why?

The tool is limited to 50MB per second in free mode. If your media is less than 50MB / s, you won’t see any speed bumps. The tool cannot go faster than your storage device allows.

Can I install the software and license key on removable media (USB stick or CD / DVD disk)?

Yes, just use the version that doesn’t need installation, unzip it onto your media, and then put your license key in the llftool.license file, located in the same folder as the main executable file.


Hard Disk Low Level Format Crack Tool is a useful application with a very specific purpose. Fortunately, it can be used for free. The downside of this is that it will keep pestering you with a log screen every time you start the program, which can be avoided if you pay a small amount of money for faster formatting speeds.

Click Given Links To Download Latest Version with Crack and Key…!

Download Now

Download Link 1|Download Link 2

Leave a Comment